- Contact Person : Mr. Chia Eric
- Company Name : Ningbo Glorie Nylon Technology Co., Ltd.
- Tel : 86-574-62935691
- Fax : 86-574-62530309
- Address : Zhejiang,Yuyao,Plastic city , Z 1501A
- Country/Region : China
- Zip : 315412
Related Product Searches:PA6 Impact-modified, 30% glass fiber reinforced,High Quality,high impact nylon 6, toughened pa6,D V30T NC
ORACLE TM D V30T NC is is an impact-modified, 30% glass fiber reinforced injection molding PA6 grade for industrial items having very high impact strength and rigidity.It has good mechanical properties,Typical applications include automotive airbag housings and half-shells for suitcases.
TEST ITEMS | TEST METHOD AND CONDITIONS | TEST RESULTS | ||
TEST METHOD | UNIT | CONTITIONS | ||
(DRY)23 | ||||
Density | ISO1183-87 | g/cm3 | 1.36 | |
Melt Volume Rate | ISO1133 | cc/10min | (235)5kg | 12 |
Tensile strength | ISO527 | MPa | 145 | |
Tensile strain at break | ISO527 | % | 6 | |
Flexural Strength | ISO178 | MPa | 204 | |
Flexural Modulus | ISO178 | MPa | 7,500 | |
Izod Notched | ISO183-93 | KJ/m2 | 2.9m/s-1J | 32 |
Heat distortion temperature | ISO75-93 | 1.8Mpa | 200 | |
Flame resistance | UL-94 | HB | ||
Glass fibre content | % | 33.8 | ||
Processing Guidelines | ||||
Material HandlingMax. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient | ||||
Typical ProfileMelt Temperature 240-260 °C (464-500 °F) Mold Temperature 60-90 °C (140-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi) | ||||
Fill RateFast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate |
We direct our energies to offer users the high-performance, consistent-quality ,cost-saving nylon. Each batch have to pass strict test before they go out .
ORACLE provide six series polyamides resin to serve users a wide range of needs.
>>> General Purpose Homopolymer
>>> Reinforced nylon resin(Glass-reinforced and/or Mineral-reinforced)
>>> Flame Retarded
>>> Friction&Wear resistance
>>> Impact resistance
>>> Special applications
Contact us for further information, general guides and/or additional information about ventilation
PS: ORACLE nylon products are mainly used to make high quality and reliable products. we don't offer recycled & cheap and nasty nylon material
PA6 Impact-modified, 30% glass fiber reinforced