Ningbo Glorie Nylon Technology Co., Ltd.
Main products:Polyamide,PA6,PA66,PET,POM
Products
Contact Us
  • Contact Person : Mr. Chia Eric
  • Company Name : Ningbo Glorie Nylon Technology Co., Ltd.
  • Tel : 86-574-62935691
  • Fax : 86-574-62530309
  • Address : Zhejiang,Yuyao,Plastic city , Z 1501A
  • Country/Region : China
  • Zip : 315412

Flame Retardant Pigmented PA6 ( Nylon 6 ) 30%GF

Flame Retardant Pigmented PA6 ( Nylon 6 ) 30%GF
Product Detailed
Excellent Balance of High Strength, Stiffness and Heat Distortion Temperature Environmental Sustainability UL-94 : V-0 g

   ORACLE TM 50F30G is a 30% glass fiber reinforced, heat stabilized, flame retardant  PA6 injection molding compound exhibiting excellent melt stability characteristics. It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.

  

TEST ITEMSTEST METHOD AND CONDITIONSTEST RESULTS
TEST METHODUNITCONTITIONS
(DRY)23
DensityISO1183-87g/cm3 1.36
Melt Volume RateISO1133 cc/10min(275)2.16kg9
Tensile strength ISO527MPa 172
Tensile strain at breakISO527% 7
Flexural Strength ISO178MPa 225
Flexural ModulusISO178MPa 7,000
Charpy NotchedISO183-93KJ/m22.9m/s-1J23.5
Heat distortion temperatureISO75-93 1.8Mpa21
Flame resistanceUL-94  V0
Glass fibre content % 30±1
Processing Guidelines
Material HandlingMax. Water content: 0.12% Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level, but 4-6 hours is generally sufficient
Typical ProfileMelt Temperature 240-260 °C (464-500 °F) Mold Temperature 60-90 °C (140-194 °F) Injection and Packing Pressure 35-125 bar (500-1500 psi)  
Fill RateFast fill rates are recommended to ensure uniform melt delivery to the cavity and prevent premature freezing. Surface appearance is directly affected by injection rate

Flame Retardant Pigmented PA6 ( Nylon 6 ) 30%GF



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.